SCIENTIFIC COOPERATIONS

Scientific Cooperations Workshops on Engineering Branches
Koc University, Istanbul/Turkey, August, 8-9, 2014

Engineering Proceeding-2014-Download
2014 Workshops Papers

IWAE-2014, International Workshop on Aerospace Engineering

1) Alireza.Roudbari, Fariborz Saghafi

Subject: Identification of Aircraft Dynamics UsingHammerstein-Wiener Nonlinear Model, pp. 1-8

Aerospace Engineering, Sharif University of Technology
Tehran, Iran

2) Fariborz Saghafi, Alireza.Roudbari

Subject: Modeling and Identification of Fighter Aircraft Nonlinear Flight Dynamics, pp. 9-16

Aerospace Engineering, Sharif University of Technology
Tehran, Iran

IWCEA-2014, International Workshop on Civil Engineering and Architecture

3) Po-Han Chen, Meng-Shen Kan, Luh-Maan Chang

Subject: Sustainable Design for Hospitals in Taiwan, pp. 17-22

Department of Civil Engineering
National Taiwan University Taipei, Taiwan

4) Yu-Tzu Chen1, Luh-Maan Chang2

Subject: Paving for the future- Precast Prestressed Concrete Pavement ( PPCP ), pp. 23-28

1 Construction Management, College of Engineering
Drexel University, Philadelphia, USA 2 Department of Civil Engineering
National Taiwan University, Taiwan

5) Rong-Yau Huang, I-Shiang Mao

Subject: Developing A Reliability-based Model for Estimation of Bridge Life Cycle MR&R Costs, pp. 29-34

Graduate Inst. of Constr. Engineering & Mgmt.
National Central University Taoyuan, Taiwan

6) Wael I. Alnahhal

Subject: Preliminary Optimization of Hybrid Frp-Concrete Bridge Systems, pp. 35-38

Depart. of Civil and Arch. Eng. College of Engineering
Qatar University Doha, Qatar

7) Farah Lazzali1, Yamina Ait Meziane2

Subject: Vulnerability and Damage Assessment of Current Buildings in Bab El Oued District in Algiers, pp. 39-42

1 Department of civil engineering
University M’Hamed Bougara Boumerdes
Algeria 2 Centre of Earthquake Engineering Research
CGS, Hussein Dey, Algiers, Algeria

8) Maria Giannopoulou1, Konstantinos Lykostratis1,Anastasia Roukouni2

Subject: Integration of GIS and Multivariable Analysis in Urban Planning, pp. 43-48

1Civil Engineering Dpt,
Democritus University of Thrace, Greece
2 Rural and Surveying Engineering Dpt
Aristotle University of Thessaloniki, Greece

9) Anastasia Roukouni1, Socrates Basbas1, Basil Stefanis2, George Mintsis1

Subject: A Novel Closed-loop Control Approach for a Flywheel and Electrical Clutch Assist Mechanism in FES Cycling

1 Rural and Surveying Engineering Dpt.
Aristotle University of Thessaloniki, Greece
2 Civil Engineering Dpt.
Democritus University of Thrace, Greece

10) Marwa Azouzi, Najla Allani

Subject: Morphological Study of Mosques in Districts of The Medina of Kairouan, pp. 57-62

National School of Architecture and Urbanism
University of Carthage, Tunisia

11) S. A. Naeini, E. Taherabadi

Subject: Effect of Injection Pressure Due to Micropile Installation on Relative Density of Sand, pp. 63-68

Imam Khomeini International University Qazvin, Iran


12) Seyed Abolhasan Naeini, Eftekhari Zakiyeh

Subject: Effect of Geotextile on the Liquefaction Behavior of Sand in Cyclic Triaxial Test, pp. 69-74

Civil Engineering Department
Imam Khomeini International University Qazvin, Iran

13) Irshad Ahmad

Subject: Parametic Study of Kinematic Soil-Pile Interaction in Two Layer Soil Profile, pp. 75-80

University of Engineering and Technology Peshawar
Pakistan

14) Daniel Stoica

Subject: Aspects of Studying the Influence of The Local Collapse of Structural Elements to Generate Progressive Collapse, pp. 81-88

Civil Engineering Department
Technical University of Civil Engineering (UTCB) Bucharest, Romania


15) Mamoun A. Alqedra, Bassam Dabbour, Mohammed H. Arafa

Subject:15-Influence of Several Nano Minerals on The Mechanical Properties of Fresh and hardened Concrete, pp. 89-94

Faculty of Engineering - Civil Engineering Department
The Islamic Universiry of Gaza

The Gaza Strip – Palestine

16) Reza Ziaie Moayed1, Mahdi Alibolandi2

Subject: 16-Effect of Anchor Inclination on Retrofitting of Foundation Bearing Capacity and Settlement, pp. 95-98

1 Civil Engineering Dept.
Imam Khomeini International University, Qazvin, Iran
1 Sama Technical and Vocational Training College
Islamic Azad University, Andisheh Branch
Andisheh, Iran

17) Reza Ziaie Moayed 1, Mahdi Alibolandi2

Subject: Influence Of Geotextile Reinforcement on Shear Modulus of Saturated Sand, pp. 99-102

1 Civil Engineering Dept.
Imam Khomeini International University, Qazvin, Iran
2 Sama Technical and Vocational Training College
Islamic Azad University, Andisheh Branch
Andisheh, Iran

18) Samia Hannachi, M.N Guetteche

Subject: Review Of The Ultrasonic Pulse Velocity Evaluating Concrete Compressive Strength On Site, pp. 103-112

Department of Civil Engineering
University of Constantine
Constantine, Algeria

19) Elfrida SHEHU, Alma AFEZOLLI

Subject: Relationship of Age And Market Value of Office Buildings in Tirana City, pp. 113-118

Polytechnic University of Tirana
Civil Engineering Department
Faculty Tirana, Albania

20) Alma AFEZOLLI, Elfrida SHEHU

Subject: Relationship of Road Lane Width to Safety for Urban and Suburban Arterials, pp. 119-124

Polytechnic University of Tirana
Civil Engineering Department
Faculty Tirana, Albania

21) Imen Cherif, Najla Allani-Bouhoula

Subject: Mosques Of Tunis Gouvernorate Constructed Between 1975 And 1995-Morphological Kowledge And Modeling, pp. 125-132

National School of Architecture and Urbanism
University of Carthage Tunis, Tunisia

22) Aida Hermi Nasri, Najla Allani Bouhoula

Subject: Structural modeling of “Domus” of Roman Tunisia (146-439 B.C.), pp. 133-138

National School of Architecture and Urbanism
University of Carthage Methods and Models for the Representation of Knowledge in Architecture Tunis, Tunisia


23) Javed Alam, Izharul Haq Farooqi, Hasan Haleem

Subject: Management of Grey Water of an Automobile workshop – A Case Study, pp. 139-144

Department of Civil Engineering Z.H. College of Eng. & Tech. Aligarh, India

24) Mehdi Veiskarami1, Mir Ahmad Lashteh Neshae2, Mehran Karimpour Fard3, Tina Pourramezan4

Subject: Stability Of Breakwaters Subject To Deep Seated Failure By The Method Of Charactristics, pp. 145-150

1 1.Department of Geomechanics
University of Guilan, Iran
2 Department of Coastal Engineering
University of Guilan, Iran
3 3.Department of Geotechnical Engineering
University of Guilan, Iran
4 Department of Marine Structures
University of Guilan, Iran

25) Shamas Shoukat Ali, K Mahmood, Ashraf Tanoli, Muhammad Atiq Tariq

Subject: Geotechnical Investigation of Collapsed Margalla Tower due to October 2005 Muzzafarabad Earthquake, pp. 151-162

Department of Civil Engineering
COMSATS Institute of Information Technology Abbottabad, Pakistan

26) M. Obaydullah, Mohd Zamin Jumaat, Md. Ashraful Alam, Kh. Mahfuz Ud Darain, and Md. Akter Hosen

Subject: L Shaped End Anchors to Eliminate Premature Plate End Debonding in Strengthened RC Beams, pp. 163-168

Department of Civil Engineering
University of Malaya
Kuala Lumpur, Malaysia

IWCPE-2014, International Workshop on Chemical and Petroleum Engineering

27) Syara Kassim, Ishak Ahmad, Rusli Daik

Subject: Thermal And Rheological Properties Of Acrylonitrile-Acrylic Acid-Itaconic Acid Terpolymers As A Precursor For Carbon Fiber, pp. 169-174

School of Chemical Sciences and Food Technology
Faculty of Science and Technology
Universiti Kebangsaan, Malaysia

28) Ishak Ahmad, Nurain Joha

Subject: Influence of Cellulose Nanocrystals (CNC) from Rice Husk on the Properties of Cassava Starch Biocomposites, pp. 175-178

School of Chemical Science and Food Technology
Bangi, Selangor Darul Ehsan, Malaysia

29) Reda Zein, Ahmed F. Nassar, Tarek M. Mostafa

Subject: Design of A chemical Absorption System for The Separation of Propane/Propylene Mixture, pp. 179-186

Chemical Engineering Department
Cairo University, Giza – Egypt

30) Naif A. Darwish 1, Fahad M. Al-Sadoon2

Subject:Computation Of Phase Stability Limits And Critical Points For Binary Systems Containing Cyclo-And Normal-Alkanes Using the NRTL Model, pp. 187-194

1 Department of Chemical Engineering
American University of Sharjah, Sharjah, UAE
2 Al-Khan Road, Sharjah
Sharjah, United Arab Emirates

31) Seif-Eddeen K. Fateen1, Ahmed M. E. Khalil1, Ragab K. Abdel-Magied2

Subject: MAKHA – A New Hybrid Stochastic Optimization Method For Phase Equilibrium Calculations, pp. 195-202

1 Department of Chemical Engineering
Cairo University, Giza, Egypt
2Production Technology Department, Faculty of Industrial Education
Beni-Suef University, Beni-Suef, Egypt

32) Mehdi Elhamnia, Godratollah Hashemi Motlagh, Zahra Abbasian, Rahimeh Godarzi

Subject: The Effect Of Graphene Chain Grafting On The Mechanical Properties Of Polymer/Graphene Nanocomposites, pp. 219-222

University of Tehran, College of Engineering
School of Chemical Engineering, Tehran, Iran

33) Rahimeh Goudarzi, Godratollah Hashemi Motlagh, Zahra Abbasian, Mehdi Elhamnia

Subject: Graphite Nanosheets As Low Shrinkage Additive And Conductive Filler For Unsaturated Polyester Resin, pp. 223-230

University of Tehran, College of Engineering
School of Chemical Engineering, Tehran, Iran

34) M.Z. Jaafar, S. Omar, S.M.M. Anuar, S.R Suradi

Subject: Reservoir Monitoring of EOR Processes (WAG, Foam and Polymer) Using Streaming Potential, pp. 231-238

Faculty of Petroleum and Renewable Energy Engineering
Universiti Teknologi Malaysia, Johor, Malaysia

IWIE-2014, International Workshop on Industrial Engineering

35) Sang-Je Cho1, Hong-Bae Jun1, Sang-Deok Choi2, Jong-Ho Shin3

Subject: A Study on The Prognosis Maintenance Algorithm For LNG FPSO Compressor, pp. 239-244

1Dept. of Industrial Engineering, Hongik University, Seoul, South Korea
2Seok-Young SYSTEMS, Seoul, South Korea
3Dept. of Design and Human Engineering, UNIST, Ulsan, South Korea

36) Majid Salari1, Zahra Najid-Azimi2, Paolo Toth3, Andrea Tramontani3

Subject:ILP-based Improvement Procedure For Solving Two Variants of The Standard Vehicle Routing Problem, pp. 245-252

1Department of Industrial Engineering, Ferdowsi University of Mashhad, Mashhad, Iran
2 Department of Management, Ferdowsi University of Mashhad, Mashhad, Iran
3DEI, University of Bologna, Viale Risorgimento 2, Bologna, Italy

37) Mohammad H. Shaelaie1, Zahra Naji-Azimi2, Majid Salari1

Subject: A Variable Neighborhood Search Algorithm for the Generalized Covering Salesman Problem, pp. 253-260

1Department of Industrial Engineering, Ferdowsi University of Mashhad, Mashhad, Iran
2 Department of Management, Ferdowsi University of Mashhad, Mashhad, Iran

IWME-2014, International Workshop on Mechanical Engineering

38) Vladimir Stojmanovski1, Zoran Bogatinovski2

Subject: Research on Behaviour of Butt-Welded Joints With Imperfections - Static and Dynamic Behaviour, pp. 261-268

1Centre for Research, Development and Continuous Education – CIRKO, LLC
Inspection Body for Pressure Equipment, Metal Structures and Cableways, Skopje, Republic of Macedonia
2 Ss Cyril and Methodius University in Skopje
Faculty of Mechanical Engineering – Skopje, Skopje, Republic of Macedonia

39) Jinai Chung, Jun-Gi Hong, Hong-In Won, Hyoungrae Kim

Subject: Squeal Noise of an Automotive Wiper Blade, pp. 269-272

Department of Mechanical Engineering

Hanyang University, Ansan, Kyeonggi-do

Republic of Korea

40) Jonghun Kim1, Seungkeun Oh1, Hyunkyu Kim1, Bongjin Kim1, Ki-Joon Jeon2, Sang-Hee Yoon1

Subject: Expanding Characteristics of Graphite in Microwaveassisted Exfoliation, pp. 273-278

1 Department of Mechanical Engineering, Inha University, Republic of Korea
2 Department of Environmental Engineering, Inha University, Republic of Korea

41) Yung-Yuan Hsu1, You-Tern Tsai2

Subject: A Simplified Approach to Measuring 21 Forms of Geometric Error for Three-axis Machine Tools: Principles and Application, pp. 279-286

1 Mechanical Engineering, Chung Hua University, Hsinchu, Taiwan, ROC
2 Mechanical Engineering, De-Lin Institute of Technology, Taipei, Taiwan, ROC

42) Kashif Javed1, Mazhar Ali2

Subject: Design & Construction of Subsonic Wind Tunnel Focusing on Two Dimensional Contraction Cone Profile Using Sixth Order Polynomial, pp.287-296

1 Department of Mechanical, Mechatronics & Manufacturing Engineering
University of Engineering & Technology, KSK Campus Lahore, Pakistan
2Lecturer: Department of Mechanical Engineering, University of Lahore, Pakistan
Student: Skolkovo institute of Science & Technology (MIT collaboration), Moscow, Russia

43) Iain Crosby, Pejman Akbari

Subject: Thermodynamic Analysis of The Atkinson Cycle, pp. 297-304

Columbia University, Mechanical Engineering Department
New York, USA

44) Muhammad Iqbal Hussain, Zuraidah Mohd Zain, NG. Hooi. Xian

Subject: Optimization of Continuous Casting Process in Steel Manufacturing Industry, pp. 305-308

School of Manufacturing Engineering
Universiti Malaysia,Perlis, Kangar Perlis Malaysia

45) Mohamad Ali

Subject: The Behaviour of the Bonded and Fastened Lap Joint, pp. 309-312

Department of Mechanical Engineering, Faculty of Engineering
Beirut Arab University, Beirut, Lebanon

46) Sefko Sikalo, Wael Avdovic

Subject: Mass Transfer and Friction Factor in Adiabatic Annular Air–Water Flow, pp. 313-316

Faculty of Mechanical Engineering, University of Sarajevo
Sarajevo, Bosnia and Herzegovina

47) Kun Hyuk Sung1, Hong Sun Ryou1, Jun Seok Nam2

Subject: Numerical Analysis of The Effect of the Thickness Of Water-Layer on Fire Resistive Performance of Curtain Walls, pp. 317-320

1 Department of Mechanical Engineering, Chung-Ang Univesity, Seoul, Korea
2 Research and Development Laboratory, Korea Fire Institute, Korea

IWMSE-2014, International Workshop on Material Science and Engineering

48) Kim Jongbae1, Il Sohn2

Subject: Influence of Various Oxides on The Complex Network Sturcture at High Temeprature Condition - Understanding of Polymerization Process of Oxides, pp. 321-326

1 Research Institute of Steel, Yonsei Univ. Seoul, Rep. of Korea
2 Materials Science and Engineering, Yonsei Univ. Seoul, Rep. of Korea

49) Hyunjoung Lee1, Il Sohn2

Subject: The Past, Present, and Future in Steel Research using Big Data, pp. 327-331

1 Research Institute of Steel, Yonsei Univ. Seoul, Rep. of Korea
2 Materials Science and Engineering, Yonsei Univ. Seoul, Rep. of Korea